Spektrum STX3 3-Channel 2.4 GHz FHSS Radio System
|

Spektrum STX3 3-Channel 2.4 GHz FHSS Radio System

Want to upgrade your RTR radio system but don’t want to break the bank? Seems reasonable, and lucky for you Spektrum has a system that looks to be perfect for that task. The Spektrum STX3 isn’t loaded with every single adjustment imaginable, multi-model memory and a LCD screen. What it does have are three channels,…

Social Share Toolbar
|

ProTek 160TBL Black Label Low-Profile High Torque Brushless Servo

Amain Hobbies’ ProTek 160TBL Black Label low-profile high torque brushless servo was used by champion-level-racer Ryan Maifield to win the 2019 ROAR 4WD Off-Road National Championships, so you know it must good. In fact, looking at the specs, it’s a lot better than just good. This servo is said to offer both rapid transit times,…

Social Share Toolbar
| |

Pit Bull RC Rocker Tread Insta-Trax

Off-roading is fun–until you get stuck. Full-size enthusiasts have been using devices such as sand ladders and traction boards for years. RC scalers have been doing the same because they look cool and, well, they work. For the most part, other than color, these traction aids have all pretty much looked the same. That has…

Social Share Toolbar
|

Xtreme Racing Aluminum and Carbon Fiber Shock Tower Stiffener and Top Plate for Traxxas X-Maxx

This Traxxas X-Maxx brace spans from the front to the rear of the big truck and is machined out of a single piece of 1/4 in. thick aluminum. The carbon fiber inserts are added for strength and looks. It is predrilled for the optional use of either the Hobbywing Max5 or Max6 speed controls. Learn…

Social Share Toolbar
|

Boom Racing Dual Stage 1.9 Foam Inserts

Often items such as foam inserts are, along some lines, a compromise. Too hard and your scaler won’t have much traction as the tire won’t be able to flex and contort. Too soft and it will flex too much and side hilling will suffer. Medium inserts or memory foam inserts might be a great anser,…

Social Share Toolbar
| |

Axial SCX10 II 1955 Ford F-100 RTR

Cool. Something different. Like a lot of you, I get sick of the same old same old. Between that and being a sucker for vintage Fords, I think Axial’s latest, a 1955 Ford, is pretty darn cool. It’s built on the proven SCX10 II platform, so you’re probably familiar with all the main features. The…

Social Share Toolbar
|

STRC Aluminum Heavy Duty Servo Mount Tray and 6.5mm Brass Hex Adapters for Element RC Enduro

If you have an Element RC Enduro, you’ll be happy to know the aftermarket support just keeps growing. Masters of aluminum, ST Racing Concepts, AKA STRC, now has a CNC Machined Aluminum Heavy Duty Servo Mount Tray and 6.5mm CNC Machined Brass Hex adapters for Team Associated’s Element RC Enduro. The CNC machined Heavy Duty…

Social Share Toolbar
|

Shark RC Bodies Outcast Street Stock Body

The recently released Shark RC Bodies Hammerhead isn’t getting the waters to itself for very long. Hot on its heels (if Hammerheads had heels, that is) is the even newer Outcast. Like the Hammerhead, the Outcast is made from .040 Lexan, available in clear, white and black and is 10 in. wide for a perfect…

Social Share Toolbar
| |

Shark RC Bodies Hammerhead Street Stock Body

Thanks to the growing popularity of the Traxxas Slash on the dirt oval, relative newcomer Shark RC Bodies has, in turn, also become a popular choice. The latest from Shark RC Bodies, however, isn’t for short course trucks turned left handers. It’s a street stock body for 1/10-scale buggies. Like its big brothers, the Hammerhead…

Social Share Toolbar
|

Xtreme Racing Carbon Fiber Dirt Oval Shock Towers for Traxxas Slash

Xtreme Racing must be paying attention to how popular dirt oval is lately because they have new carbon fiber shock towers, front and rear, for the Traxxas Slash. While you could use them for a variety of applications, such as drag racing or speed runs, these were specifically designed for and ideal for dirt oval….

Social Share Toolbar
|

T-Work’s Car Stand

The standout (no pun intended) feature on this car stand is the labeling of the shock holders. This is a great idea since it’s likely that racers aren’t building four identical shocks. The T-Work’s stand is made from a single piece of aluminum, but features pads on top to help keep your car in place….

Social Share Toolbar
|

McAllister Highside Tickler Midwest Modified body

Eastern Dirt Modifieds, or EDMs, are getting all the attention these days, but there’s a lot more racing going on out there. If something different appeals to you, McAllister has you and your race car covered. Its latest release is the Highside Tickler Midwest Modified body. The “Tickler” is a 3-piece, vacuumed-formed midwest modified body…

Social Share Toolbar
| |

RC4WD Trident Foldable Winch Anchor

Whether we’re talking scale or the real deal, a winch without something to attach to is pretty useless. That’s where anchors come in. No, not boat anchors, but its pretty much the same principle. In fact, winch anchors are often called land anchors, and just like boat anchors they come in all shapes in sizes….

Social Share Toolbar
|

RC4WD Cali Off-Road Distorted 1.9 Beadlock Wheels

I feel like I’ve said this before, but the amount of options we have in RC, especially in the scale segment, is simply staggering. It’s great, and adding to the offerings is RC4WD with yet another highly-detailed scale wheel. The Cali Off-Road Distorted Wheel is 1.9 in. and features a jet engine blade-like spoke design….

Social Share Toolbar
|

AKA Pro Multi Tip Tire Punch

AKA is discontinuing its popular tire punch tool, but no worries, it has a new and improved version. The new Pro Multi Tip Tire Punch features a cantilever design to increase punch pressure and reduce effort needed. The rotating head offers six different size holes. The punch sizes include 2-, 2.5-, 3-, 3.5-, 4- and…

Social Share Toolbar