Painting a truck with bed liner is a great way to add protection and durability to the body. It’s an easy job that can be done in a few hours, but it’s important to make sure you have the right amount of bed liner before you start. Knowing how much bed liner you need is essential for getting the job done right.
The amount of bed liner required will depend on the size and shape of your truck. If your truck has a standard cab and 8-foot long bed, then you’ll need around 6 quarts of bed liner.
If your truck has an extended cab and 8-foot long bed, then you’ll need around 7 quarts of bed liner. If your truck has a crew cab and 6-foot long bed, then you’ll need around 5 quarts of bed liner.
Once you know how much material is needed for the job, it’s important to make sure that you have all of the necessary supplies for applying it. You’ll need a paint roller, painter’s tape, masking paper, drop cloths, gloves, goggles and respirator if necessary.
Preparing the Truck
Before applying the bed liner to your truck, it’s important to properly prepare it first. This includes making sure that all surfaces are free from dirt and debris.
You should also use a degreaser or wax remover solution to remove any built-up grease or wax on the surface. Once this is done, use an abrasive pad or sandpaper to scuff up any glossy surfaces so that the paint will adhere properly.
Applying The Bed Liner
Once everything is ready, it’s time to start painting! Start by taping off any areas where paint shouldn’t go like rubber trim pieces or emblems.
Then stir up the material thoroughly before pouring it into your paint tray. Using a roller with medium nap coverings works best for this job as it gives good coverage without leaving brush strokes.
Work in small sections at a time from one end of the truck to another so that each side gets equal coverage. Allow each section time to dry before moving onto another area until all sides are completely covered.
Conclusion
Knowing how much bed liner you need for painting a truck is essential for getting the job done right. The amount required will depend on size and shape of your vehicle but typically 6-7 quarts are needed for standard cabs with 8-foot beds while 5 quarts are needed for crew cabs with 6-foot beds. Additionally, make sure that all surfaces are prepped properly before applying and use adequate safety gear when handling chemicals like degreasers or wax removers.
How Much Bed Liner Do I Need To Paint A Truck?
The amount of bed liner required depends on size and shape of your vehicle but typically 6-7 quarts are needed for standard cabs with 8-foot beds while 5 quarts are needed for crew cabs with 6-foot beds. Preparing the surface properly before application is essential in order get optimal results from painting with Bedliner
