Remote control cars have been a popular hobby for many years. They are fun and addicting and offer hours of entertainment.
With the right parts and a bit of know-how, you can bind your own remote control car to its controller. Here’s how!
1. Connect the Receiver
The first step is to attach the receiver to your RC car.
This receiver will receive signals from the controller and translate them into movements that your car will make. Make sure to plug in the receiver properly into the port on the car, then secure it with screws or tape if necessary.
2. Place Batteries in the Controller
Next, place batteries in both the RC car and its controller. Be sure to use rechargeable batteries for a longer-lasting experience.
3. Activate Bind Mode on Your Controller
Now it’s time to bind your controller and car together so they can communicate with one another. To do this, you’ll need to activate bind mode on your controller by pressing and holding down a designated button until you hear a beep or see a light flash.
4. Activate Bind Mode On Your Car
Once bind mode is activated on your controller, turn on your RC car then quickly press and hold down its bind button until you hear two beeps or see two lights flash simultaneously.
5.
Test Out Your Remote Control Car
Congratulations! You have successfully bound your remote control car with its controller. Now all that’s left is to test it out by pressing some buttons on the remote and seeing if they’re correctly translated into movements by your RC car.
Conclusion:
Binding an RC car with its controller isn’t difficult as long as you follow these five simple steps: connecting the receiver, placing batteries in both devices, activating bind mode on both devices, and finally testing out your remote control car.
