How Do I Increase the Height of My RC Car?

Increasing the height of your RC car can be a great way to increase its performance and stability. It can also help you to get more ground clearance, which is essential for navigating rough terrain. With the right set of tools and a bit of know-how, it is possible to raise the height of an RC car or truck.

Tools and Materials Needed
You will need a few tools and materials before you can begin to increase the height of your RC car. These will include:

  • Adjustable wrench
  • Socket wrenches
  • Screwdriver
  • Set of hex keys or Allen keys
  • Metal ruler or measuring tape
  • RC suspension arms

Step 1: Locate Suspension Arms and Measure Height
The first step in increasing the height of your RC car is to locate the suspension arms. These are typically located on either side of the car, just above the wheels. Once you have located them, use a metal ruler or measuring tape to measure the current height from the ground up to where the suspension arms are mounted.



Next, you will need to remove the suspension arms from the car in order to access them. Use an adjustable wrench or socket wrenches to loosen any screws that may be holding them in place. You may also need a screwdriver and/or set of hex keys (or Allen keys) depending on your particular model.

>


After removing the old suspension arms, you can now install new ones that are taller than your original set. Make sure they are securely attached and tightened down with screws or bolts before moving on.

>


Finally, once you have installed new suspension arms, measure from the ground up again to make sure that they have been properly adjusted for increased height. If not, use an adjustable wrench or socket wrenches to adjust them until they reach your desired height.

>

Conclusion

>

With a few tools and some patience, it is possible for anyone to increase their RC cars’ ride height. This can be done by removing existing suspension arms, installing new taller ones, then adjusting them as necessary until they reach their desired ride height.

>

Photo of author

Stephen Dunn