For those who enjoy snowboarding, having the right equipment is essential. With the proper care and maintenance, your board will last you many years. But how do you transport your board safely?
One of the best solutions is to make a truck bed snowboard rack. This will allow you to easily and securely transport your board from place to place without worrying about it. Here’s what you need to know about making a truck bed snowboard rack.
Step 1: Gather Materials
The first step in making a truck bed snowboard rack is gathering the necessary materials. You’ll need two 8-foot long 2x4s, one 4-foot long 2×4, four 2-inch long bolts and nuts, four 3-inch long lag screws, one 4-foot long piece of 1/2 inch diameter rope, and one 3-foot long piece of 1/8 inch thick galvanized wire.
Step 2: Cut Wood
Once you have all the materials, it’s time to start cutting the wood. Cut the 8-foot long 2x4s into two 4-foot lengths and cut the 4-foot 2×4 into four 12-inch lengths.
Step 3: Assemble Frame
Now it’s time to assemble the frame of your truck bed snowboard rack. Place two of the 12-inch pieces perpendicular to each other on a flat surface and screw them together with two of the lag screws.
Next, attach each of these pieces to one of the 4-foot pieces using two more lag screws.
Step 4: Attach Rope & Wire
Take your 1/2 inch diameter rope and attach it to both ends of your frame using four bolts and nuts. Then take your 3 foot piece of galvanized wire and wrap it around each end of your frame at least three times for extra stability.
Step 5: Mount Rack To Truck Bed
Finally, mount your truck bed snowboard rack onto your truck bed by drilling holes in each corner and screwing in lag screws or bolts as needed. Make sure that all screws are tightened securely so that everything is held firmly in place once you load up your board.
Making a truck bed snowboard rack is an easy DIY project that anyone can do with basic tools and materials. It will provide an easy way for you to transport your board while also keeping it secure while on the road. With just a few simple steps you can easily put together a sturdy rack that will last for many years.
In conclusion, making a truck bed snowboard rack is not difficult as long as you have all the necessary materials on hand. Gather all the material required, cut wood according to specifications, assemble frame, attach rope & wire, mount onto truck bed – these are some simple steps required for making this useful equipment which allows easy transportation of boards with maximum security.
