Starting a nitro RC car without a glow plug igniter may be tricky, but it is possible. To begin, you will need to find an alternative ignition source for your vehicle. One way to do this is by using a regular 9V battery and some jumper cables.
Step 1: Begin by connecting the red wire from the jumper cable to the positive terminal of the 9V battery and the black wire to the negative terminal.
Step 2: Then attach the other end of each jumper cable to the engine’s spark plug wires. Make sure you connect them properly; red goes on positive and black goes on negative.
Step 3: Once everything is connected, it’s time to start your engine. Pull out the glow plug igniter (if applicable) and then turn on your car’s power switch.
Step 4: Now all that’s left is to use the 9V battery as an ignition source by pressing and holding down its positive terminal against one of the spark plug wires for about five seconds. This will create enough electricity to ignite your fuel mixture and start your engine.
Conclusion: Starting a nitro RC car without a glow plug igniter can be done with some simple steps and supplies such as a 9V battery, jumper cables, and an understanding of how electricity works. With these tools, you can easily get your vehicle up and running in no time!
