Transporting a jon boat in a truck bed is a job that requires care, appropriate supplies, and experience. However, it can be done with relative ease.
Here are the steps you’ll need to take:
Gather Supplies: Before you begin the process of transporting your jon boat in a truck bed, you’ll need to gather several supplies. These include two sturdy straps, two sets of ratchet straps, four-by-four pieces of wood to act as a buffer between the boat and the truck bed, and wheel chocks to keep the boat from moving around in transit.
Secure Your Boat: Once you have all of your supplies gathered and ready for use, you can begin securing your jon boat to the truck bed. The first step is to place four-by-four pieces of wood along both sides of the truck bed.
This will create a buffer between the metal surface of the truck bed and the hull of your jon boat, preventing any damage from being caused during transport. Once this padding is in place, you can secure two straps underneath each side of your jon boat. Make sure these straps are tight enough so that they won’t come loose during transit.
Attach Ratchet Straps: Now that your jon boat is securely fastened underneath each side with straps, it’s time to attach ratchet straps on top. These should be placed at four different points on each side of your jon boat; one at the bow and stern on both sides will suffice.
Make sure these are tightened down well so that they won’t move or come undone during transport. Finally, place wheel chocks on both sides of your jon boat as an extra precaution against movement during travel.
Loading Your Boat: In order for your jon boat to fit properly in the back of the truck bed, you will need to load it from either side instead of from behind or in front of it. This ensures that there is enough room for both ends of your jon boat to fit inside without causing any damage or discomfort for those riding inside the cab area. To make loading easier, use ramps or boards to help slide it into position and then secure it with ratchet straps once it’s in place and checked for stability before heading off on your journey!
Conclusion: Transporting a jon boat in a truck bed is not a difficult task if done correctly and with appropriate supplies on hand. By using four-by-four pieces of wood as padding between the metal surface and hull of your vessel, securing two straps underneath each side, attaching ratchet straps at four different points along each side, loading from either side instead of behind or frontwardly and adding wheel chocks for extra security; transporting a Jon Boat safely should be an easy task!
