Will Jon Boat Fits in Truck Bed?

A Jon Boat is an aluminum, flat-bottomed boat that is typically used for fishing, hunting and light recreational boating. It is usually propelled by oars or electric trolling motors and has a relatively shallow draft. Jon Boats are popular because they are inexpensive, very durable and can be easily transported on top of a car or truck.

So, the question is: Can a Jon Boat fit in a truck bed? The answer depends on the size of the boat and the size of the truck bed.

Generally speaking, smaller Jon Boats (under 12 feet long) can fit in the beds of compact or mid-size pickups. Larger Jon Boats (over 12 feet long) may not fit in a standard pickup bed but could fit in larger trucks such as full-size pickups.

When trying to fit a Jon Boat into a truck bed, there are several things to consider. First, you’ll need to measure the length and width of your boat as well as the size of your truck bed.

Second, you’ll need to make sure that you have enough room for both your boat and any other gear that you plan on transporting with it. Third, you’ll need to make sure that your truck has adequate tie down points so that you can secure your boat safely.

Once you have all of these measurements in hand and have confirmed that your truck is large enough to accommodate your boat, then it’s time to start loading it up! It’s important to be careful when handling your Jon Boat as aluminum boats are quite fragile when not properly supported. Start by placing foam padding or carpeting along the bottom of the truck bed so that it won’t sustain any damage while being transported.

Once secured, place 2x4s along each side of the boat so that they support its sides while being hauled down the road. Finally, use straps or tie downs to secure everything together so it won’t move around during transport.

Conclusion:

In conclusion, most smaller Jon Boats can fit in a standard pickup bed if properly measured and loaded. Larger boats may require larger trucks with more tie down points for safe transport. When loading up your Jon Boat into a truck bed always use foam padding or carpeting to prevent damage and secure it with straps for maximum safety.

Photo of author

Stephen Dunn