Will Truck Bed Coating Work on Wood?

Truck bed coating is a popular choice for protecting truck beds from rust and corrosion, but can it also be used on wood? The short answer is yes, as long as the wood is properly prepared beforehand. Here’s how you can make sure your wood is ready for truck bed coating.

Step 1: Cleaning
The first step in prepping wood for truck bed coating is to clean it thoroughly. Use a regular household cleaner to remove dirt, debris and other contaminants that could interfere with the adhesion of the coating.

After wiping the surface down with a clean cloth, use an abrasive pad to scuff up the surface. This will help to create a better bond between the coating and the wood so that it will last longer.

Step 2: Sanding
Once you have finished cleaning the surface, you will need to sand it down to create a smooth finish. Start by using an orbital sander with 120-grit sandpaper and work your way up to 220-grit or higher if desired.

This will help ensure that the coating has something smooth and even to adhere to. Be sure to wipe away any dust or debris left behind by sanding before proceeding with the next step.

Step 3: Priming
After sanding, you’ll need to apply a primer coat before applying the truck bed coating. This will help protect the wood from moisture and provide an extra layer of protection from UV rays that could cause fading over time. Choose a primer specifically designed for use on wood and apply it according to manufacturer instructions for best results.

Step 4: Coating
Finally, once your surface is prepped and primed, you are ready to apply your truck bed coating of choice. Make sure you read all instructions carefully before beginning application so that you achieve optimal results.

When applying, use even strokes with a brush or roller until all of the cracks and crevices are filled in evenly throughout. Allow proper drying time before using your newly coated surface!

Conclusion:

When done properly, truck bed coating can be used on wood surfaces without any issues – just make sure you take extra care in preparing your surface beforehand! With some cleaning, sanding and priming ahead of time, you can easily protect your wooden surfaces from rust and corrosion with long lasting results!

Photo of author

Stephen Dunn